1 ton one to two molten steel furnace induction holding furnace double smelting
In this double smelting operation, a smelting type molten steel furnace is usually used as a melting furnace, and a groove type induction electric furnace is used for heat preservation.
furnace. There are also cases where a sigma type induction holding furnace is used, but it is less.
With the purpose of this double-configuration form, the main balance between the melting part and the molding department is the production capacity.
The lure-type induction holding furnace is used as a molten iron reservoir to accommodate continuous casting of automatic lines or lines.
The 坩埚-type induction furnace can use low-cost raw materials such as iron filings and scrap steel, and has the characteristics of adjusting the iron and the temperature.
Therefore, the composition of the molten iron is uniform. In countries where electricity is directly supplied, electricity is cheap, and environmental pollution is severely restricted,
It is increasingly used as the main melting equipment. This double type is widely used in modern foundry workshops for mass production.
Adopted in general.
In view of China's power supply situation and energy price policy, this type of dual-type military has not been widely applied.
1 ton one to two molten steel furnace double smelting operation
The electric arc furnace is used as a melting furnace, and the induction electric furnace is used as a double-operation combination form of the holding furnace, mainly solving the balance melting department.
Contradictions between supply and demand of molten iron between the molding department.
The electric arc furnace melts the cast iron with the advantages of refining, and also can use a large number of inferior raw materials and large pieces of rust.
Scrap steel. However, it is difficult to adjust the composition in the electric arc furnace, and it is difficult to achieve the molten iron heat preservation and continuous melting operation. This shortcoming happens to be
Induction furnace with double operation to make up.
This type of double-connection is mostly based on the original electric arc furnace, and the induction electric furnace is added for double operation.
