KGPS-8T-10 induction melting furnace for sale
Machine price
KGPS-8T-10G induction melting furnace (steel shell furnace) 260RMB (one machine, one furnace)
6-phase 12-pulse rectification eliminates 5th, 7th and 9th harmonics
KGPS-8T-10 induction melting furnace
1. Intermediate frequency induction heating power supply:
1. Rated phase-in voltage: 1000V, intermediate frequency output voltage ( induction melting furnace ) 5400V
2. KK SCR 3000A/2000V 24 (Songdao Induction Heating Technology Co., Ltd.)
3. KP controllable Silicon 3000A/3500V 24 (Songdao Induction Heating Technology Co., Ltd.)
4. Air switch 3500A/electric two (Zhejiang Tianzheng)
5. Installed copper
bar 120 mm X 10 mm 6. Reactor: double reactor, coil copper tube The diameter is 25 mm, the number of coils: 12,
if you change to an integrated inductor (patent number: 2007 2 0092390.5, maintenance-free, maintenance-free, 15 degrees per ton of molten iron can be smelted), an additional 250,000 yuan is required.
The integrated inductor, the technical achievement of our factory, replaces the reactor, reduces the low power consumption by 75%, has automatic protection, maintenance-free, and high reliability. The reactor commonly used at home and abroad, because it is a coil made of a hollow tube, has a small conductive area and large electrical loss, because each coil needs to be supplied with water, the waterway is complicated, maintenance and repair are difficult, and the failure rate is high.
7. Leading induction type, furnace leakage warning system, monitors the condition of the furnace lining at any time, and prevents the occurrence of accidents of molten iron passing through the furnace and furnace leakage.
8. Intelligent system, our core technology, high reliability, convenient operation, simple debugging and maintenance, domestic original creation.
2. Capacitor cabinet:
Use high-voltage, high-capacity capacitors (4000KF/2300V 60 units, Xinanjiang brand), which can reduce reactive current by 60% and save electricity by 25 degrees per ton of steel.
3. Steel shell induction melting furnace :
high-voltage induction furnace with a voltage of up to 5200V, which can reduce reactive current by 60%, and can save electricity by 200 degrees per ton of molten iron.
Specific parameters:
super large stainless steel furnace shell, length: 2.7 meters, width: 2.7 meters, height 2.5 meters,
hydraulic tilting furnace system,
induction coil inner diameter: 1.3 meters,
number of induction coils: 27 coils, full series structure
induction coil copper tube specifications: 25 Mm X 60 mm X 5 mm
Features:
1. Intelligent system, fast protection speed, durable thyristor, good starting performance, stable work and convenient operation.
2. Adopting large copper busbars to save electricity.
3. Install the furnace bottom cooling ring, the furnace bottom heat is small, the furnace bottom is durable, not easy to wear, and the furnace bottom loss is small; using a three-step boost circuit, the voltage at both ends of the electric furnace can reach 5200V (the output voltage of the intermediate frequency induction heating power supply 3 times of ), water cable, induction coil loss is small; 1000V phase-in voltage, reactor, installed copper bar, and phase-in cable loss are small. Using our patented product integrated inductor (patent number: 2007 2 0092390.5), long life, maintenance-free, and energy-saving.
Equipped with a 4000KVA transformer, it can melt 8 tons of molten iron in 45-50 minutes, and melt 1 ton of molten iron with electricity from 450 degrees to 490 degrees.
Equipped with a 3150KVA transformer, it can melt 8 tons of molten iron in 65 minutes-70 minutes, and melt 1 ton of molten iron with 600 degrees-650 degrees.
