How does the induction heating furnace work?
1. The oblique push-type sequential induction heating furnace is used to heat round blanks. The length of the blanks is several times its diameter. The flat circular inductors are used. The blanks are placed horizontally in the inductor, and its axis and induction The axis of the device is vertical. The feeding is completed by the pushing device and the feeding mechanism. The method of using this oblique push is that the blank will not roll. This oblique push type, sequential induction heating furnace escapes It is suitable for heating blanks with small diameter, long length and high productivity.
2. The periodic induction heating furnace blank at the end of the blank is placed on the roller table or bracket in front of the inductor, and then the heated blank end is sent into the inductor, and the power is cut off after the induction heating to the required temperature. Exit the sensor.
3. After the blank of the vertical sequential induction heating furnace is pushed to the lower part of the inductor, the ejector device rises, and the blank is sent into the inductor, and the blank is supported by the support block at the lower part of the inductor. A cold blank is fed into the lower part of the sensor, and a hot blank that has been heated to meet the temperature requirements is introduced from the upper part of the inductor, that is, one feeding and discharging is completed according to the production cycle. During the heating process, the inductor is continuously powered, and this induction heating method is suitable It is suitable for heating blanks with large diameter and short length, such as round cakes and slab blanks. The advantage is that the inductor of this induction heating method does not bear the blank.
