Medium frequency forging furnace

Characteristics

1. Medium frequency induction heating power supply, worktable, induction coil, feeding mechanism, infrared thermometer, etc.; 
2 , ultra-small size, movable, covering only 0.6 square meters, convenient for use with any equipment, installation, commissioning and operation Very convenient, one will meet;

Application range

● Suitable for heating copper rods, iron rods and aluminum rods ; 

● Continuous heating of round bars, square materials or other shapes of wool and other materials ; 

●The whole material can be heated or partially heated, such as end heating, heating in the middle part, etc. 

Device parameters

● Workbench + heating sensor + feeding mechanism + heating power + compensation capacitor box; 

● According to different application requirements, it may also include infrared thermometer, temperature controller and feeding, coiling and other devices; 

● Can be customized according to your needs. 

Equipment advantage

● Ultra-small size, movable, covering only 0.6 square meters. 

● Convenient for use with any forging and rolling equipment and robots; 

●It is very convenient to install, debug and operate. 

● It can be heated to the required temperature in a very short time, greatly reducing metal oxidation, saving material and improving forging quality; 

● available 24 hours a day, is heated uniformly, and more rapid; 

● Environmental protection, comply with environmental protection requirements, and avoid the troubles of environmental inspection; 

● Power saving, compared with thyristor intermediate frequency, not only small size, easy maintenance, but also saves 15-20% . 

● It is convenient to replace the furnace body to meet the different requirements of the overall heating or end heating of the bar; 

Forging furnace specifications and heating capacity