1T parallel intermediate frequency furnace
The main purpose of 1T parallel intermediate frequency furnace
1T parallel IF melting furnace is mainly applied to steel, iron, copper, aluminum and alloys, having a high melting efficiency, energy-saving effect, a uniform metal composition, burning small, quick temperature rise, easy to control temperature, etc., suitable for all melting metals.
1T parallel intermediate frequency furnace consists of:
800kw parallel intermediate frequency power supply - steel shell furnace body - water cooled cable - remote operation console - ZXZ-80 T closed loop cooling tower.
1T parallel intermediate frequency furnace price summary table
The price of the 1T parallel intermediate frequency furnace is calculated according to the power of the intermediate frequency power supply and the volume of the furnace body. Different configuration prices vary. This price is for reference only. Contact us will have a very low price, please consult the specific price. Firstfurnace@gmail.com
|
Device name |
model |
Quantity |
Total price (yuan) |
time |
|
1T parallel intermediate frequency furnace |
SDCL - 80 0 kw |
1 set |
￥ 235000 |
60 days |
1T parallel intermediate frequency furnace item price
|
Serial number |
Item name |
Specification model |
unit |
Quantity |
unit price |
Total (yuan) |
|
1 |
800kw parallel intermediate frequency power supply |
KGPS- 800kw / 1 T |
station |
1 |
140000 |
140000 |
|
2 |
Steel shell body |
GW- 1 T |
station |
1 |
80000 |
80000 |
|
3 |
Water cooled cable |
LHSD- 40 0 square |
root |
2 |
3000 |
8000 |
|
4 |
Leakage alarm system |
LB T -1 |
set |
1 |
5000 |
5000 |
|
5 |
Remote console |
H T -YK |
station |
1 |
4 000 |
4 000 |
|
Total price: ￥ 235000 |
||||||
1T parallel intermediate frequency furnace power supply , tonnage , power consumption selection method .
|
Parallel intermediate frequency furnace model: GW T -1 T / 800 KW |
6- pulse rectifier power supply |
12- pulse rectifier power supply Aluminum shell body Advanced configuration |
12- pulse rectifier power supply |
|
Parallel intermediate frequency power supply |
800 kw |
800 kw |
800 kw |
|
Phase voltage |
3*660V |
6*660V |
6*660V |
|
Electric furnace rated voltage |
3000V |
3000V |
3000V |
|
Melting rate |
About 1.1 T / H |
About 1.2 T / H |
About 1.3 T / H |
|
Rated Capacity |
1 T |
1 T |
1 T |
|
Rated temperature |
1800 ° C |
1800 ° C |
1800 ° C |
|
Intermediate frequency power rectifier |
3- phase 6- pulse rectification |
6- phase 12- pulse rectification |
6- phase 12- pulse rectification |
|
DC |
680A |
680A |
680A |
|
Alternating current |
555 A |
555 A |
555 A |
|
Power factor |
≥0.9 2 |
≥0.9 2 |
≥0.9 2 |
|
Tilting method: |
Optional gearbox or hydraulic |
Optional gearbox or hydraulic |
Optional gearbox or hydraulic |
|
With power supply specifications |
KGPS-1/ 800 |
KGPS-1/ 800 |
KGPS-1/ 800 |
|
Fast intermediate frequency power supply |
A set of 6- pulse IF power supply |
A set of 12- pulse IF power supply |
A set of 12- pulse IF power supply |
|
Compensation capacitor cabinet |
set |
set |
set |
|
stove |
Aluminum shell furnace |
Aluminum shell furnace |
Steel shell mechanism furnace (including yoke) |
|
Reducer |
A |
A |
Hydraulic |
|
Water cooled cable |
Two |
Two |
Two |
|
Decidua |
One |
One |
One |
1T parallel intermediate frequency furnace circuit diagram :
The advantages of 1T parallel intermediate frequency furnace :
1. Due to the characteristics of the resonant circuit, the variable frequency power supply with parallel resonance has good protection when the circuit is short-circuited. Because the reactor device with buffer function installed in the intermediate circuit can effectively suppress the rapid rise of current, it can be reliably turned off when the circuit fails.
2 , resonant frequency conversion environmental source and inverter side loss is very small (because the large current only works in the resonant circuit) and accurate coil voltage control (to make full use of the highest power of the capacitor group)
3 , the technology is mature, the performance of the whole machine is stable and reliable, and has a competitive advantage.
4 , easy to operate, easy to use
5 , the maintenance speed is fast, the maintenance difficulty and maintenance costs are low!
6 , the price is relatively cheap.
What are the choices of the seven, 1T parallel intermediate frequency furnace structure ?
1T parallel IF Furnace consists of four portion of the furnace shell, an induction coil, lining, etc. gearbox tilting furnace furnace structure wherein selecting two ways: In the structure of aluminum alloy reducer turndown mode melting furnace supply Commonly known as aluminum shell furnace. The induction melting furnace of the steel structure with the hydraulic cylinder as the tilting furnace is commonly called the steel shell furnace. The steel shell furnace is a steel structure , and the aluminum shell furnace shell material is an aluminum alloy . Because the 1T parallel intermediate frequency furnace is in the middle , thealuminum shell furnace and the steel shell furnace are all used by customers, and the domestic steel shell furnace is mostly.
