First, how to quickly choose a good 5T series intermediate frequency furnace ?
|
Just look at 54 seconds and you will choose 5T series intermediate frequency furnace |
|||
|
Serial number |
name |
5T series intermediate frequency furnace |
5T parallel intermediate frequency furnace |
|
1 |
Power Factor |
Constant power factor 0.9 6 |
Power factor 0. 7 -0.92 |
|
2 |
Melting power consumption |
580 ±5% kW.h/t (1600°C) |
≤6 2 0±5% kW.h/t (1600°C) |
|
3 |
Resonance mode |
Voltage resonance, low loss of line (copper row and furnace ring) |
Current resonance, large loss of line (copper row and furnace ring) |
|
4 |
harmonic |
Low harmonics, low pollution to the grid |
High harmonics, large pollution to the power grid |
|
5 |
Start success rate |
Start success rate 100% |
It is difficult to start the device under heavy load conditions. |
|
6 |
effectiveness |
10%-20% higher |
Low efficiency because of low power factor and large harmonic pollution |
|
7 |
Easy to use |
Achieve one-to-one, one-for-two, one-to-three, and other work modes |
The parallel resonant power supply can only achieve one-to-one operation mode. |
|
8 |
protection |
Complete protection |
Relatively complete protection |
|
9 |
Material costs |
Higher material cost, rectification increases filter capacitance, voltage resonance component parameters select high value |
Lower material cost, without increasing the rectifier filter capacitor, a low current value of the parameter selection resonant Component |
Description: 5T power factor
The power factor of the series intermediate frequency furnace is high: ≥0.9 6 , because all the thyristors in the rectification part of the power supply are in the fully open state , the rectifier circuit is always in the all-on state, and the rising power is realized by adjusting the voltage of the series inverter bridge . Therefore, the entire operation process (including low power, medium power, high power) can ensure that the equipment is always in a high efficiency stage.
Parallel intermediate frequency furnace power factor is low: ≤0. 92 , because all the thyristors in the rectification part of the power supply are in a semi-open state (adding additional compensation according to the requirements of the national grid). The power regulation of the parallel line is adjusted by the rectification conduction angle, so At low power, the power factor of the power system is very low, generally between 40% and 80%; the high harmonics are large and seriously interfere with the power grid.
Second, 5T series intermediate frequency furnace consists of:
Transformer - 3000kW series IF power - copper bar - series inverter cabinet - the PLC melt Management - steel melting furnace - ZXZ- 240T closed loop cooling tower.
Third, 5T series intermediate frequency furnace price summary table
The price of the 5T series intermediate frequency furnace is calculated according to the power of the intermediate frequency power supply and the volume of the furnace body. Different configuration prices vary. This price is for reference only. Contact us will have a very low price, please consult the specific price. Firstfurnace@gmail.com
|
Device name |
model |
Quantity |
Total price ￥ |
Delivery time |
|
5 tons series intermediate frequency furnace |
SD C L- 30 00kw |
1 set |
￥: 1516000 yuan |
60 days |
5 ton inverter series intermediate frequency furnace itemized price list
|
Serial number |
Item name |
Specification model |
unit |
Quantity |
unit price |
Total (yuan) |
|
1 |
transformer |
ZS11-2000KVA |
station |
1 |
200000 |
200000 |
|
2 |
Connecting copper bars |
300 square |
set |
1 |
30000 |
30000 |
|
3 |
Intermediate frequency power supply |
KGPS- 3000 kw / 5 T |
station |
1 |
300000 |
300000 |
|
4 |
Series inverter cabinet |
KGPS- 3000 kw / 5 T |
station |
1 |
300000 |
3 00000 |
|
5 |
PLC melting Management |
|
set |
1 |
20000 |
20000 |
|
6 |
Melted steel shell body |
GW- 5 T |
station |
1 |
250000 |
250000 |
|
7 |
Water cooled cable |
LHSD- 60 0 square |
root |
4 |
4000 |
16000 |
|
8 |
Leakage alarm system |
LBT-1 |
set |
1 |
5000 |
100000 |
|
9 |
Refractory clay |
|
station |
1 |
5000 |
10000 |
|
10 |
Remote console |
HT-YK |
station |
1 |
10000 |
10000 |
|
11 |
Counterflow closed-loop cooling tower |
ZXZ-N 240 T ( 60/180) |
station |
1 |
240000 |
240000 |
|
12 |
Installation valve and piping |
|
set |
1 |
20000 |
20000 |
|
13 |
Furnace ejector mechanism |
|
set |
1 |
20000 |
20000 |
|
Total price￥: 1516000 |
||||||
Fourth, 5T series intermediate frequency furnace power supply , tonnage , power consumption selection method .
|
5T series intermediate frequency furnace model: SD C L- 30 00kw |
6- pulse rectifier power supply |
12- pulse rectifier power supply
Aluminum shell body Advanced configuration |
12- pulse rectifier power supply |
|
Equipment rated power |
3000kw |
3000kw |
3000kw |
|
Phase voltage |
3*660V |
6*660V |
6*660V |
|
Electric furnace rated voltage |
3000V |
3000V |
3000V |
|
Melting rate |
About 5T /H |
About 5T /H |
About 5T /H |
|
Rated Capacity |
5T |
5T |
5T |
|
Rated temperature |
1800 °C |
1800 °C |
1800 °C |
|
Intermediate frequency power rectifier |
3- phase 6- pulse rectification |
6- phase 12- pulse rectification |
6- phase 12- pulse rectification |
|
Power factor |
≥0.95 |
≥0.95 |
≥0.95 |
|
Tilting method: |
Optional gearbox or hydraulic |
Optional gearbox or hydraulic |
Optional gearbox or hydraulic |
|
With power supply specifications |
KGPS- 0.5 / 3000kw |
KGPS- 0.5 / 3000kw |
KGPS- 0.5 / 3000kw |
|
Series intermediate frequency power supply |
One set (with filter capacitor inside) ) 6- pulse intermediate frequency power supply |
One set (with filter capacitor inside) 12- pulse intermediate frequency power supply |
One set (with filter capacitor inside) 12- pulse intermediate frequency power supply |
|
Compensation capacitor cabinet |
set |
set |
set |
|
stove |
Aluminum shell furnace |
Aluminum shell furnace |
Steel shell mechanism furnace (including yoke) |
|
Reducer |
A |
A |
Hydraulic |
|
Water cooled cable |
Two |
Two |
Two |
|
Decidua |
One |
One |
One |
