(1) Technical conditions:
1 working temperature: room temperature - 2000 ° C;
2 temperature uniformity: ± 5 ° C (3 points temperature measurement, 1000 ° C constant temperature);
3 temperature control accuracy: ± 1 ° C;
4 empty furnace heating rate: ≥500 °C / h;
5 controllable temperature zone: 1;
6 working area size: Φ550mm × 400mm;
7 ultimate vacuum: ≤ 8 × 10-4Pa (empty furnace, cold state);
8 hot state vacuum: ≤ 5 × 10-2Pa (empty furnace, 1600 ° C);
9 pressure rise rate: ≤ 0.5Pa / h;
10 press working tonnage: 150T;
11 indenter diameter: Φ250mm;
12 pressurization mode: two-way pressurization;
13 indenter stroke: upper and lower indenter each 100mm;
14 stroke control accuracy: ≤ 1mm;
15 inflation pressure: 0.11MPa (absolute pressure)
16 inflation gas: nitrogen or argon
(2) Installation conditions:
Installation form: vertical body, press vertical (double beam and four columns);
Power supply: 210kw, 380V;
Water source: pressure ≥0.3Mpa, flow rate ≥5t/h;
