Detailed and accurate method for classifying heat treatment furnaces
Trolley type resistance furnace:
The trolley type electric resistance furnace (brick structure) is a periodic heat treatment electric furnace, which is widely used for quenching, annealing, normalizing and tempering of high chromium, high manganese steel castings, alloy steel, ductile iron, rolls, steel balls and stainless steel. Heat treatment of various mechanical parts.
All-fiber trolley type resistance furnace:
The all-fiber trolley type electric resistance furnace is a full-fiber trolley furnace (all-fiber structure) is a standard energy-saving periodic heat treatment electric furnace, super energy-saving structure, and the furnace lining adopts full-fiber ceramic high-aluminum folding block sticking technology, which is durable and durable, and there is no worry The fiber shedding problem, the service life is much higher than the brick furnace.
The advantages are fast heating speed, uniform furnace temperature, good thermal insulation performance, high thermal efficiency, environmental protection and energy saving. Widely used in high chromium, high manganese steel castings, alloy steel, gray cast iron parts, ductile iron parts, rolls, steel balls, crusher hammers, wear liners, stainless steel and other quenching, annealing, normalizing, tempering and Heat treatment of various mechanical parts.
All-fiber gas trolley type resistance furnace:
The all-fiber gas trolley type electric resistance furnace is a gas trolley furnace (all-fiber structure) is a new environmentally-friendly and energy-saving periodic heat treatment electric furnace, with ultra-energy-saving structure. The furnace lining adopts full-fiber ceramic high-aluminum folding block sticking technology, which is durable and does not exist. Worried fiber shedding problem, the service life is much higher than the brick furnace.
The advantages are fast heating speed, uniform furnace temperature, good thermal insulation performance, high thermal efficiency, environmental protection and energy saving. Widely used in high chromium, high manganese steel castings, alloy steel, gray cast iron parts, ductile iron parts, rolls, steel balls, crusher hammers, wear liners, stainless steel and other quenching, annealing, normalizing, tempering and Heat treatment of various mechanical parts.
Flip type trolley furnace
The all-fiber inverted trolley resistance furnace and the brick-inverted trolley resistance furnace are periodic heat treatment electric furnaces, which are widely used in high chromium, high manganese steel castings, ductile iron, gray cast iron parts, wear resistant liners, rolls, steel Quenching, annealing, normalizing, and heat treatment of various mechanical parts such as balls, 45# steel, and stainless steel. The trolley of the trolley furnace adopts anti-collision sealing brick, automatic turning mechanism, anti-workpiece impact brick at the furnace mouth, automatic sealing trolley and furnace door, integrated rail, no basic installation, horizontal floor and foundation horn Or an expansion screw can be used
The use of the pusher furnace:
It belongs to continuous heat treatment electric furnace and is widely used in carburizing and quenching heat treatment process for batch small and medium-sized parts (such as gears, bearings and chains).
Isothermal furnace
It is a continuous energy-saving heat treatment electric furnace, which is widely used for heat treatment of normalizing, quenching and heating of precision forging blanks of automobiles and motorcycles.
Gas isothermal normal furnace
It is a continuous energy-saving heat treatment furnace, which is widely used for heat treatment of normalizing, quenching and heating of precision forging blanks for automobiles and motorcycles.
Energy-saving gas isothermal normal furnace
It belongs to the continuous new energy-saving heat treatment furnace. It is a patented product of our company. It mainly provides the method and device for the isothermal normalizing of the alloy carburized steel parts by forging waste heat. The calculated process parameters can be used for the precise control operation of the device. Ensure that the normalized mass of the steel is not lower than or better than the quality of conventional normalizing and isothermal normalizing heat treatment. Widely used in automotive, motorcycle precision forging blanks, normalizing, quenching, heating and other heat treatment.
Use of multi-purpose furnace:
It belongs to periodic heat treatment electric furnace and is widely used in heat treatment of bearings, chains, standard parts, fasteners, hardware tools, stainless steel and elastic parts in the machinery industry.
The purpose of the drum furnace:
It is a periodic heat treatment electric furnace, widely used in machinery, light industry, textile, instrumentation, electrical appliances, bearings and other industries in the chain, standard parts, driving parts, sewing machine parts, bearing balls, steel balls and other small mechanical parts for gas infiltration Heat treatment such as carbon, nitriding, gas carbonitriding.
The purpose of the heating furnace:
It belongs to periodic heat treatment electric furnace and is widely used for quenching, annealing, normalizing, tempering and heat treatment of various mechanical parts such as high chromium and high manganese steel castings, alloy steel, ductile iron, rolls, steel balls and stainless steel.
A furnace is a device that heats a material or workpiece. According to the heat source, there are a fuel heating furnace, a resistance heating furnace, an induction heating furnace, a microwave heating furnace, and the like. Applications include petroleum, chemical, metallurgy, machinery, heat treatment, surface treatment, building materials, electronics, materials, light industry, daily chemical, pharmaceutical and many other industries.
The use of well gas nitriding furnace:
It is a periodic heat treatment electric furnace, which is widely used in various steel mechanical parts, automobile crankshafts, automobile piston rings, motorcycle brake pads, molds, etc. for gas nitriding heat treatment.
Well type tempering furnace use:
It is a periodic heat treatment electric furnace, which is widely used in heat treatment of various metal parts, disk materials and shaft parts in the relatively sealed state chamber after high temperature, low temperature tempering and aging after carburizing and quenching.
The use of pit furnace:
It belongs to periodic heat treatment electric furnace and is widely used in various mechanical parts and long shaft workpieces.
Aluminum sheet annealing furnace
It is an energy-saving periodic heat treatment electric furnace, which is widely used for intermediate annealing of finished products and semi-finished products such as aluminum sheets, aluminum wires and aluminum alloy coils.
Aluminum coil annealing furnace
It is an energy-saving continuous heat treatment electric furnace, which is widely used for intermediate annealing of finished products and semi-finished products such as aluminum and aluminum alloy coils.
Aluminum pouring annealing furnace
It is an energy-saving periodic heat treatment electric furnace, which is widely used for intermediate annealing treatment of aluminum and aluminum alloy coils, plates and other finished products and semi-finished products.
Heat treatment processes such as quenching, quenching, and heating.
Use of T4 aluminum alloy quenching furnace:
It is a periodic heat treatment electric furnace, which is widely used in the aluminum alloy industry---the quenching of various aluminum alloy materials (such as 6061, 6063, 2A14, 2014, A356, etc.) for bicycle frames and automobile and motorcycle wheels and accessories. , solution heat treatment.
The use of aluminum alloy T6 furnace:
It is a periodic heat treatment electric furnace, which is widely used in the aluminum alloy industry - the aging of various aluminum alloy materials (such as 6061, 6063, 2A14, 2014, A356, etc.) for bicycle frames and automobile and motorcycle wheels and accessories. Hardening heat treatment.
Aluminum alloy heat treatment furnace
Aluminum alloy vertical quenching furnace
It is a kind of energy-saving periodic heat treatment electric furnace, which is widely used in the rapid quenching and solid solution treatment of automobile aluminum hubs, aluminum castings and various aluminum alloy parts. After the constant temperature time, the transfer speed of the workpiece is less than 10 seconds, the heat treatment time is fast and the temperature is uniform. .
Aluminum alloy well type rapid quenching furnace
It is an energy-saving periodic heat treatment electric furnace, which is widely used in the rapid quenching (solid solution) treatment of aluminum alloy tubes, aluminum alloy rods, aluminum alloy profiles, aluminum tools, aluminum measuring tools, aluminum castings and various aluminum alloy parts. The transfer speed of the workpiece is less than 10 seconds, the heat treatment time is fast, and the ambient temperature is uniform.
Aluminum alloy gas vertical rapid quenching furnace
It belongs to energy-saving periodic heat treatment industrial furnace, widely used in automobile aluminum wheel hub, electric vehicle aluminum wheel hub, bicycle aluminum wheel hub, aluminum castings and various solid aluminum alloy parts for rapid solution (quenching) treatment. After the constant temperature time, the workpiece is transferred. The speed is less than 10 seconds, the heat treatment time is fast, and the ambient temperature is uniform.
Aluminum alloy solid melting furnace
It belongs to energy-saving periodic heat treatment electric furnace and is widely used for solid solution, heating and quenching treatment of aluminum alloy products and aluminum profiles.
Aluminum alloy heat treatment furnace
It is an energy-saving periodic heat treatment electric furnace, which is widely used for quenching, solid solution, aging, hardening and heat treatment of aluminum alloy parts and aluminum alloy products.
Aluminum alloy aging furnace
It is an energy-saving periodic heat treatment electric furnace, which is widely used for aging (hardening) heat treatment of aluminum products, aluminum alloy tubes, aluminum alloy rods and aluminum profiles.
Aluminum alloy gas aging furnace
It belongs to the new environmental protection and energy-saving periodic heat treatment furnace, which is widely used in the aging (hardening) heat treatment of aluminum products, aluminum alloy tubes, aluminum alloy rods and aluminum profiles.
Aluminum alloy hardening furnace
It belongs to energy-saving periodic heat treatment electric furnace and is widely used for hardening (aging) heat treatment of aluminum alloy parts, aluminum alloy products, aluminum alloy tubes, aluminum-gold alloy rods and aluminum profiles.
The use of aluminum coil annealing furnace:
It is an energy-saving continuous heat treatment electric furnace, which is widely used for intermediate annealing of finished products and semi-finished products such as aluminum and aluminum alloy coils.
Uses: Well type spheroidizing annealing furnace is mainly suitable for spheroidizing annealing treatment of low carbon steel, medium carbon steel, low alloy steel and other wires and disc elements.
The use of aluminum melting furnace:
It is an energy-saving periodic heat treatment electric furnace widely used in the melting heat treatment of aluminum and aluminum alloy products and parts.
Use of sintering furnace:
It is a periodic heat treatment electric furnace, widely used in the sintering of ceramic powder, ceramic ferrule and other zirconia ceramics in the steel industry, metallurgical industry, electronics industry, etc., sintering of diamond saw blades, can also be used for copper and steel strips. Heat treatment such as annealing.
The use of deep well furnaces:
It is a periodic heat treatment electric furnace, which is widely used in various mechanical parts and long-axis workpieces for heat treatment such as quenching, quenching and tempering and heating.
The purpose of the well type carburizing furnace:
The well type gas carburizing furnace is a new energy-saving cycle working type heat treatment electric furnace, which is mainly used for low carbon steel, mechanical parts, steel parts, gas carburizing, quenching and other heat treatment.
The purpose of the experimental box furnace:
It is an energy-saving periodic heat treatment electric furnace, which is widely used in the quenching, annealing, tempering and heat treatment of crystal, jewelry and mirror film for a wide range of small steel parts. It is most suitable for elemental analysis of colleges, research institutes and laboratories.
Mesh belt furnace
The use of mesh belt furnace:
It is a continuous energy-saving heat treatment electric furnace, which is widely used for quenching, carburizing and heating of small and medium-sized mechanical parts such as standard parts, bearings, transmission chains, self-tapping screws, textile hardware, hand tools, springs, spring washers and auto parts. Tempering heat treatment for tempering, cleaning, etc.
Use of mesh belt quenching furnace:
It is a continuous energy-saving heat treatment electric furnace, which is widely used for quenching, carburizing, heating, etc. of small and medium-sized mechanical parts such as standard parts, bearings, transmission chains, self-tapping screws, textile hardware, hand tools, springs, spring washers, and auto parts. Mass production for heat treatment.
The use of mesh belt back to the furnace:
It is a continuous energy-saving heat treatment electric furnace, widely used in standard parts, bearings, transmission chains, self-tapping screws, textile hardware, hand tools, springs, spring washers, auto parts, etc.
Widely used in batch production of quenching, carburizing, heating, tempering, cleaning, etc. of small and medium-sized mechanical parts such as standard parts, bearings, drive chains, self-tapping screws, textile hardware, hand tools, springs, spring washers, and auto parts. For cleaning.
Mass production heat treatment for tempering, heating, drying, etc. of mechanical parts.
The use of no muffle belt furnace:
It is a continuous energy-saving heat treatment electric furnace, which is widely used in bearings, standard parts, automobiles, motorcycles, machine tool chains, weapons, cutting tools, light textiles, daily-use hardware, etc. It can continuously carburize small, medium and large mechanical parts. Heat treatment process for bright quenching and carbonitriding mass production.
Use of no Mavto roller net belt furnace:
It is a continuous energy-saving heat treatment electric furnace, which is widely used in bearings, standard parts, automobiles, motorcycles, machine tool chains, weapons, cutting tools, light textiles, daily-use hardware, etc. It can continuously carburize small, medium and large mechanical parts. Bright quenching (significant effect), heat treatment process for mass production of carbonitriding.
Use of no Mavto plate mesh belt furnace:
It is a continuous energy-saving heat treatment electric furnace, which is widely used in bearings, standard parts, automobiles, motorcycles, machine tool chains, weapons, cutting tools, light textiles, daily-use hardware, etc. It can continuously carburize small and medium-sized and large mechanical parts ( The effect is remarkable), bright quenching, carbonitriding mass production of heat treatment process.
Steel brazing furnace
It is a continuous heat treatment electric furnace and is widely used in equipment for metal brazing and bright heat treatment. Suitable for mass production of small and medium-sized stainless steel parts (tableware, knives, hardware, etc.), such as martensitic stainless steel bright quenching, tempering, austenitic stainless steel bright annealing.
Aluminum fiber welding furnace:
It is a continuous heat treatment electric furnace, widely used in the filter refrigeration parts of the automotive industry, aerospace industry, and can also be used in refrigerators, air conditioners, electronics, microwave magnetron industry and other stainless steel, carbon steel, brass, copper parts. Brazing and bright heat treatment.
Application: Brazing furnace is mainly used in steel industry, metallurgical industry, etc.
The purpose of the box furnace:
The box type resistance furnace is a periodic heat treatment electric furnace, which is widely used for quenching, normalizing, annealing, tempering and other heat treatment of general metal parts in the air.
Use of nitrate furnace:
It is a periodic heat treatment electric furnace, which is widely used for tempering metal parts in mixed nitrate solution.
The purpose of the salt bath furnace:
It is a periodic heat treatment electric furnace, mainly for heating metal parts in molten salt liquid or mixed salt liquid for quenching, annealing, tempering, normalizing, non-oxidation heating, isothermal cooling and chemical heat treatment (cyanide, seepage Carbon, metal infiltration).
Use of vacuum furnace
Well type vacuum furnace is a periodic heat treatment electric furnace, widely used in non-oxidative bright annealing and tempering of iron chips, silicon steel sheets, electronic components, tool measuring tools and other mechanical parts; also used for carbon steel, alloy steel and non-ferrous metal parts. And the plate, strip and wire are brightly annealed under the protective atmosphere.
The purpose of the positive furnace:
For low carbon steel, after normalizing, the hardness is slightly higher than annealing, and the toughness is also good, which can be used as a pretreatment for cutting.
Used for medium carbon steel, it can be used as the final heat treatment instead of quenching and tempering, or as a preliminary treatment before surface hardening by induction heating.
Used in tool steel, bearing steel, carburized steel, etc., can reduce or inhibit the formation of reticulated carbides, thus obtaining the good structure required for the spheroidizing annealing furnace.
Used in steel castings, it can refine the as-cast structure and improve the cutting performance.
For large forgings, it can be used as the final heat treatment to avoid a large tendency to crack during quenching.
It is used in ductile iron to improve hardness, strength and wear resistance, such as crankshafts and connecting rods for automobiles, tractors and diesel engines.
A normalizing of the hypereutectoid steel before spheroidizing annealing can eliminate the reticulated secondary cementite to ensure that the cementite is completely granulated during the spheroidizing annealing.
