1.5 Ton cast iron melting induction furnace is made up of IF power cabinet, water-cooled cable, furnace body and hydraulic station. The equipment is widely used in smelting,casting of metals such as iron, steel, aluminum, copper, etc.
1.5 T iron melting furnace advantages:
1. Power factor maintains above 0.96 in the whole process, without need of additional compensation device.
2. Effective control of higher harmonics, does not interfere with the surrounding electrical equipment, and not pollute the power grid.
3. Wide range of frequency adaption, stays at best resonant state in the whole melting process.
4. Soft-start mode zero-voltage scan, you can startup or stop the machine at any state or any time, without impact on the power supply.
5. Fast smelting speed, low cost of production; low pollution in line with the requirement of environmental protection.
6. Smelting can start directly in cold furnace; the solution can be fully poured out, easy replacement of melt material.
7. Flexible power regulation available with continuous smooth adjustment; uniform temperature and easy control, less oxidation or burning loss, uniform metal compositions;
8. Built-in leakage alarm device, timely effectively protects the safety of personnel and equipment.
Main parameters of 1.5 Ton Cast Iron Melting Furnace:
| Furnace body material | Steel shell |
| Induction coil | Copper tube(30*50*4mm, 16turns) |
| Inner diameter of coil | 780m |
| Intermediate frequency | 700HZ |
| IF Voltage | 2800V |
| Power | 1000KW |
| Rectifier pulse | 6 phases 12 pulses |
| Melting rate | 1.7 tons/hour |
| Power supply cabinet | IF Power(KGPS-1000/0.7) |
| Trsansformer capacity | 1x1250KVA |
| Secondary Voltage |
6φ660V |
