KGPS-0.5T-1 type induction melting furnace detailed configuration list
1. Electric cabinet:
1. Rated phase-in voltage: 380V, intermediate frequency output voltage 900V, DC current (maximum): 1200A, power (maximum): 600KW
2. KK Thyristor 1000A/1600V 8
3. KP SCR 1000A/1600V 6 pcs
4. Reactor (copper pipe diameter 12mm, wall thickness 1mm coil, 6 pieces)
5. Constant power control system
2. Capacitor cabinet:
Capacitor 2000KF /750V 3 sets
Three, stove
Reducer: 231
Furnace shell: diameter 900 mm high 1100 mm.
Induction coil: Copper tube 25 mm X 35 mm X 3 mm, inner diameter 580 mm, 15 coils.
Features:
Commonly used type, fast protection speed, good starting performance, stable work and low price.
To
Detailed configuration list of KGPS-0.5T-2 induction melting furnace
1. Electric cabinet:
1. Rated phase-in voltage: 380V, intermediate frequency output voltage 900V, DC current: 1200A, power: 600KW
2. KK Thyristor 1000A/1600V 8
3. KP SCR 1000A/1600V 6 pcs
4. Air switch 1600A
5. Installed copper bar 60mm X 6mm
6. Reactor (copper pipe diameter 12mm, wall thickness 1.2mm coil, 8 pieces)
6. Intelligent system
2. Capacitor cabinet:
Capacitor 2000KF /750V 3 units 360KF/750V 1 unit
Three, stove
Reducer: 431
Furnace shell: diameter 1130 mm high 1280 mm.
Induction coil: Copper tube 20 mm X 30 mm X 3 mm, inner diameter 550 mm, 25 circles.
Features:
1. Intelligent system, fast protection speed, durable thyristor, good starting performance, stable work and convenient operation.
2. Adopting large copper busbars to install the machine, saving electricity; using booster circuit, the voltage at both ends of the electric furnace can reach 1800V (twice the output voltage of the electric cabinet), water cable, induction coil loss is small, and electricity saving.
