The advantages of 1 ton metal melting furnace:

Our series inverter SCR intermediate frequency power supply has the following advantages.

1.The operation is very simple, to avoid accidents caused by mistakes.

2.Multiple security protection measures, early detection of problems, and avoiding further expansion of the failure.

3.High power factor, low harmonic interference. The power factor of the whole machine is ≥0.98, no extra equipment is needed, so the investment cost is reduced.

4.To adapt to a variety of load frequencies.

5.High start-up success rate, any load state can be 100% start, with a very high load adaptability: Even in the frozen furnace (cold stove) state can still be high-power factor full-load output.

6.A very high energy-saving effect: relative parallel resonant power saving rate can reach 30%.

7.Environmental protection and energy saving, the sound of the whole machine is stable and light, no clutter noise, and minimal harmonics in the power network.

Equipment components:

The equipment consists of a intermediate frequency power supply, a coreless steel shell induction melting furnace, water cooling tower and auxiliary equipment required for the normal operation of the system.