200KG electromagnetic copper melting furnace is a metal melting equipment developed by our company for use below 1000 °C . Its functions have the following characteristics:

1, energy savings: copper average power of 0.4 ~ 0.5 / KG copper, more than 30% saving over traditional stoves;

2 , efficient use: 1 hour 600 ° rising temperature, heating speed is super fast, lasting constant temperature;

3 , environmental protection and low carbon: in line with national energy conservation and emission reduction policies, no dust, no fumes, no harmful emissions;

4, security and stability: 32-bit CPU self-developed technique, having a drain, a drain copper, overflow, power and other intelligent protection;

5 , copper slag less: electromagnetic eddy current induction heating, no heating dead angle, high utilization of raw materials;

6 , life extension:crucible heat evenly, the temperature difference is small, the life expectancy is extended by 50% ;

7, precise temperature control: eddy current transient response, self-heating of the crucible, no conventional heating hysteresis;

1, for the industry:

Copper casting plant, plant copper ingots, scrap copper melting industry, casting plant, the production of automobile and motorcycle parts, cell phone housings, lamps, electric cooker heating plate manufacturer

2 , product introduction:

200KG electromagnetic copper melting furnace is the best energy-saving electromagnetic melting copper equipment to replace traditional resistance type, coal-fired, fuel oil and medium frequency furnace . With the rising cost materials, all walks of life are facing fierce market competition, and the increase of electricity costs is even more Adding to the metallurgical industry. The emergence of 200KG electromagnetic copper melting furnace solves various problems in the metallurgical industry. It has the advantages of intelligence, security, money saving, environmental protection and other national support, and is sought after by the metallurgical industry.

3 , product classification: 200KG electromagnetic melting copper furnace

Model: SD -AI- 200 KG

Melting furnace lining : silicon carbide graphite crucible

crucible Material: Copper alloy

crucible Capacity: 200 KG

Rated power: 60KW

Melt capacity / ton: 3 6 0 kWh / ton

Insulation power consumption / hour: 4 degrees electricity / hour

Melting speed kg / hour: 120KG / hour

4 , heating principle:

The electromagnetic melting furnace converts electrical energy into thermal energy by an electromagnetic induction heating controller using an electromagnetic induction heating principle. First, the internal alternating current is converted into direct current through an internal rectification and filtering circuit, and then the direct current is converted into high frequency magnetic energy through a control circuit. The high-speed changing current passes through the coil to generate a high-speed magnetic field. When the magnetic field lines in the magnetic field pass through the crucible, numerous small eddy currents are generated inside the crucible, so that the crucible itself generates heat at a high speed, transfers heat to the copper alloy, and dissolves into a liquid.