How to extend the service life of furnace lining for small high temperature box furnace

After lining the small high-temperature box-type furnace, how to operate it correctly and reasonably is the key to prolonging the service life of the small-sized high-temperature box-type furnace and ensuring life safety. We should proceed from four aspects.

1, check in advance

Under normal circumstances, check whether the water cooling system water flow is unobstructed, whether the cooling water pressure and temperature are normal, whether there is water leakage, and whether the hydraulic system can work normally before operating the small high-temperature box furnace and experimental electric furnace;

2, observe frequently

When it is found that there is redness on the outside of the furnace body of the small high-temperature box furnace, this is the precursor to the furnace leakage, and measures such as shutting down the intermediate frequency power supply and pouring out the molten material in the furnace should be taken in time to avoid the occurrence of furnace leakage accidents.

3. Be careful

During the operation, please be careful not to touch, one person to operate, one person to supervise, and it is strictly forbidden to enter the computer room to prevent electric shock. During the smelting process, dry melt should be used, and the material should be discharged lightly and frequently added. When the melt in the furnace is melted to meet the needs, it should be poured out in time to avoid high temperature and increase the loss of the furnace lining;

4. Replace the old furnace lining in time

It should also be noted during use. When the furnace lining is found to become very thin and cannot be used continuously, the old furnace lining should be smashed down and replaced with a new one to prevent leakage accidents.

In addition to this, regular, correct and meticulous maintenance is an important guarantee for prolonging the service life of small high-temperature box furnaces and guaranteeing ***, and it is also an essential step to avoid hazards.

The above is the method to prolong the service life of the lining of the small high temperature box furnace. If you have different opinions, welcome everyone to share, learn together, thank you!

https://songdaokeji.cn/