Detailed introduction of intelligent high temperature carbon furnace SD2-2.5-13TS

SD2-2.5-13TS single tube intelligent high temperature carbon furnace:

SD2-2.5-13TS dual-tube intelligent high-temperature carbon furnace is a high-temperature experimental equipment, dedicated to steel carbon and sulfur analysis. The use of high-quality ultra-light energy-saving ceramic fiber liner is energy-saving and efficient, and the energy consumption is only one-half of the ordinary carbon furnace. The high-temperature resistance wire generates heat, the heat insulation layer is fiber cotton blanket, the metal shell, and the porcelain tube is easy to replace.

The controller is located under the furnace body, integrated production, the electrical connection of the furnace body and the temperature controller has been completed before leaving the factory, and can be used after power on. The control system adopts the LTDE programmable meter with the heating rate settable, and the PID+SSR system Synchronous and coordinated control makes it possible for the consistency and reproducibility of experiments or experiments. It has automatic constant temperature and time control functions, and is equipped with a secondary over-temperature automatic protection function, which is reliable in control and safe to use;

SD2-2.5-13TS single tube intelligent high temperature carbon furnace detailed information:

1. Product technical parameters

Temperature range: 100 ~ 1300℃;

Fluctuation degree: ±1℃;

Display accuracy: 1℃;

Furnace size: φ22×380MM*2;

Heating area: 280MM

Standard furnace tube: φ22×600 MM*2;

Heating rate: ≤80°C/min; (can be arbitrarily adjusted to any speed lower than 80 degrees per minute)

Whole machine power: 2.5KW;

Power source: 220V, 50Hz

two. Temperature control system

Temperature measurement: S index platinum rhodium-platinum thermocouple;

Control system: LTDE fully automatic programmable instrument, PID adjustment, control accuracy 1℃

Complete sets of electrical appliances: use brand contactors, cooling fans, solid state relays;

Time system: heating time can be set, constant temperature time control, automatic shutdown when constant temperature time is reached;

Over-temperature protection: built-in secondary over-temperature protection device, double insurance;

Operation mode: The whole range can be adjusted with constant temperature, and the program is run in constant operation.

3. Furnace structure and materials

Furnace shell material: The outer box is made of high-quality cold plates, treated with phosphoric acid film salt, and sprayed at high temperature, and the color is computer gray;

Furnace material: It is made of six-sided high-radiation, low-heat storage and ultra-light fiber stove board, which is resistant to rapid cold and heat, and is energy-saving and efficient;

Insulation method: fiber cotton blanket;

Temperature measurement port: the thermocouple enters from the bottom of the furnace body;

Connection post: the heating furnace wire connection post is located under the furnace body;

Furnace body bracket: made of angle steel frame metal panel, built-in control system and compensation wire, located under the furnace body

Heating element: high temperature resistance wire;

Whole machine weight: about 15KG

Standard packaging: wooden box

Four. Equipped with technical information and accessories:

Operating Instructions

warranty card

five. After-sales service:

Responsible for remote technical guidance to users

Provide equipment spare parts and accessories in time

Provide technical consultation and support during equipment use

Respond immediately within 8 working hours after receiving customer failure notification

six. Main components

LTDE programmable control instrument

solid state relay

Intermediate relay

Thermocouple

Cooling motor

High temperature heating wire

Technical parameters of the same series of intelligent high temperature carbon furnace

Customers who purchase smart high-temperature carbon furnaces may also use supporting equipment:

(1) 88 porcelain boats 1000 pcs/carton,

(2) 50 porcelain-fired pipes/box.

(3) Smart muffle furnace XL-1A.

(4) 600G/0.1G electronic balance

(5) 100G/0.01G electronic balance

(6) 100G/0.001G electronic balance

(7) 200G/0.0001G electronic balance

(8) Vertical blast drying oven DGG-9070A

(9) pH meter PHS-25 (pointer type accuracy ±0.05PH)

(10) PHS-3C pH meter (digital display accuracy ±0.01PH)

https://songdaokeji.cn/category/products/muffle-furnace-laboratory-furnace-box-type-electric-furnace