How to make the inductor of the induction heating furnace?

1. The inductor of the induction heating furnace is a spiral coil wound by a rectangular copper tube. The distance between the turns of the coil is fixed by copper screws and bakelite columns, supported by cement asbestos, and fixed on the bottom of the welded profile. On the support, after the four-layer insulation treatment and pressing test pass the coil copper tube, the furnace lining is knotted and dried, and finally the water temperature measurement and alarm device is installed. Safety protection and decorative effect.

2. The inductor coil of the induction heating furnace is connected to the intermediate frequency power supply through the copper bus bar and the vertical bar. The copper bus bar should be insulated like the coil. The conductive plate of the bus bar is designed as a hook type, which is pressed by bolts. Replace the induction The sensor only needs to loosen the bolt to achieve the purpose of quickly replacing the sensor circuit.

3. The water path of the inductor of the induction heating furnace is connected to the inlet and outlet water paths of the inductor through the quick connector. The quick connector is a snap-on type. The purpose is to facilitate the replacement of the sensor.

4. The center height of the inductor of the induction heating furnace is the same as that of the feeding device and the discharging device. The length of the inductor is designed to be different lengths of inductors according to different heating power, heating time and length of the heated workpiece. Generally below 200Kw is 0.8 meters, 350Kw is 1.6 meters, 500Kw is 2.0 meters, 750Kw is 2.6 meters, 1000Kw is 4 meters, 2000Kw is 5 meters and so on.

5. The inductors of the induction heating furnace are divided into through-type, local heating inductors, horizontal feeding inductors, vertical feeding inductors, flat furnace inductors, etc. The inductor styles can be designed and manufactured into different types according to the heating workpiece and heating requirements. and style.