Horizontal type hot core box double shot core shooting machine

Model ZRS-PC700-2-1                         

1. purpose

This machine is suitable for mass production of small and medium-sized castings. It is made of micro-computer digital control. The process parameters are digitalized and automated, the use efficiency is improved, and the product quality is stable . Can play the purpose of improving quality and output. The design of the whole machine is reasonable, the function is complete, and the use is flexible and convenient.

2. main specifications

ZRS-PC700-2-1

Model Description: specification for type

Z: Foundry industry code

R: hot box / L: cold box

S: horizontal typing / C: vertical typing

PC: Automatically bring computer empty: manual without computer

700 : main size: 600 , 700,800,900 , customized

 number of shots

 Work station: 1 single station, 2 double stations, 5 single station moving mold

 3. structure

 1 : This machine consists of the fuselage, sand storage room, sanding bucket, upper template, lower template, core control , computer controller , heating circuit , and pneumatic piping system.

   2 : The fuselage consists of a solid steel frame, the upper part supports the sand storage room, and the lower part is a cavity-forming mechanism. The inside of the fuselage is provided with a gas storage tank , a control valve installation room and an electric control cabinet.              

 3 : The sand shooting mechanism adopts digital time control, and the time and pressure of shooting can be adjusted.

 4 : Pneumatic control pipeline system adopts standard electronically controlled solenoid valve, and selects 24V safety voltage , which has less waste of gas source, good control effect and lower failure rate.

 4. lifting installation and adjustment

   1 : When lifting the equipment, it should be hung on the nose hook or evenly hang on the base of the fuselage at four points to ensure safety and then construction.

   2 : After the equipment is placed on the work site, the level of the work surface should be guaranteed and should not exceed 1/1000.