Learn these three steps and you can operate the induction melting furnace correctly.

The induction melting furnace is a kind of equipment used for casting forging and hot processing. It consists of several parts such as frequency conversion device, furnace body and furnace control. It converts three-phase power frequency alternating current into direct current and then outputs through inverter circuit. After being converted into a single-term intermediate frequency alternating current, heat treatment of the metal is realized according to the principle of electromagnetic induction. However, in order to ensure that the induction melting furnace can operate efficiently, it is necessary to carry out safe operation. The following is a detailed description of how to carry out safe operation.

First, the precautions before opening the furnace

The intermediate frequency electric furnace must inspect the electrical equipment, the water cooling system, the inductor copper tube, etc. before the furnace is opened. Only when these several equipments are in good condition can the furnace be opened to ensure the safety of the heat treatment, otherwise it is forbidden to open the furnace; Personnel who are responsible for power transmission and furnace opening, and the responsible personnel are not allowed to leave the post without authorization. During the work, the external conditions of the sensor and the cymbal must be supervised to prevent people from touching the sensor and cable after power transmission, affecting the intermediate frequency electric furnace. Normal operation or a safety accident.

Second, the precautions after the furnace

After the induction melting furnace is opened, during the charging, the inside of the furnace should be inspected to avoid mixing with flammable and explosive materials. In order to prevent the occurrence of the capping phenomenon, it is strictly forbidden to directly add the cold material and the wet material in the molten steel, and after the molten liquid is filled to the upper portion, the bulk material should not be added; in order to avoid the explosion accident, it is necessary to ensure the pouring place and the furnace. There is no water in the front pit, no obstacles. In the pouring, two people need to cooperate, and the remaining molten steel can only be dumped at the place where it is made, and cannot be dumped anywhere.

Third, the precautions during maintenance

When maintaining the medium frequency electric furnace, the internal frequency generator room should be kept clean, and flammable and explosive materials should not be stacked. Repair the furnace with excessive melt loss in time, and avoid the incorporation of iron filings and iron oxide in the furnace to ensure the compaction of the crucible.