1. Medium frequency furnace water cooled cable

The medium frequency furnace water cable soft conductor uses enameled wire. When the medium frequency current is transmitted, there is no surface skin effect, the power transmission efficiency is high, the heat generation is small, and the outer sheath hose is not easy to aging. The enameled wire is softened, and the stress at the connection part with the electrode is small. When the furnace or the furnace is operated, the connection between the electrode of the water-cooled cable and the soft wire is not broken.

2. Electric arc furnace water-cooled cable

The surface of the electrode is tin-plated, corrosion-resistant, and has good electrical conductivity. The end has a lifting ring for easy on-site installation. The hose and electrode are fastened. Two stainless steel clamps are used. It is safe and reliable. The outer sheath tube is made of high quality rubber hose. It is soft. Good bending performance, soft wire is made of high-strength enameled wire, corrosion-resistant, no surface skin effect.

3. Coaxial water cooled cable

Two-way water, two-way power, concentricity, less leakage inductance, low power loss, energy saving.

4. Resistance furnace water cooled cable

The electrode is made of whole copper rod; the soft wire is made of enameled wire, and the green sheath is produced without long-term use; the outer sheath hose is resistant to high working water pressure and will not break; the cooling water channel is smooth, the cooling effect is good; the outer sheath hose is resistant High breakdown voltage, high current transmission, safe and reliable; a variety of specifications, a variety of models for users to choose.

5. Electroslag furnace water-cooled cable

The electrode has a variety of structures (flat flange type; flare type; rotary electrode type), there are three types of inlet and outlet (on the side of the electrode; in the plane of the flange; on the end face of the electrode); the soft conductor is made of enameled wire, and the green wire is used for a long time. Embroidery is produced; the outer sheath hose is resistant to high working water pressure and will not break; the cooling water passage is smooth and the cooling effect is good; the outer sheath hose has high breakdown voltage, high current transmission, safe and reliable; various specifications, various models, For the user to choose.

6. Submerged arc furnace water-cooled cable

The electrode material is T2 copper. The electrode structure can be made according to user's requirements. The surface is tinned. The position of the inlet and outlet can be determined according to the installation position of the user equipment. The outer sheath hose is used for high temperature fire treatment. It is suitable for the working environment of the ore furnace. High current, safe and reliable.

7. Vacuum furnace water cooled cable

One end of the cable electrode is a bell lock nut type, which is connected with the induction coil in the vacuum furnace. The other end electrode structure is a flat flange type, which is connected with a capacitor. The outer sheath hose of the cable has a tapered sealing ring to ensure the vacuum furnace shell. Body seal, in the water-cooled cable part inside the vacuum furnace, the outer sheath is made to prevent high temperature treatment. The cooling water of the water-cooled cable directly enters the induction coil in the vacuum furnace, and is circulated and cooled. It is widely used in the NdFeB magnetic material vacuum sintering furnace. It can replace imported cables abroad.

8. Polycrystalline furnace water cooled cable

The water-cooled cable electrode is connected with the coaxial electrode of the induction coil of the polysilicon purification furnace. The structure of the water-cooled cable electrode is 90° elbow bell mouth taper locking type, ensuring no twist when connecting with the polysilicon purification furnace, ensuring natural bending and improving The service life of water-cooled cables.

9. Single crystal furnace water cooled cable

Non-contact electrode, the surface is treated with anti-corrosion treatment, the live wire is connected with the sealing ring after the inlet and outlet, and the soft wire is made of enameled wire (the one in the country). The rust is soft and not easy to break. The soft wire is connected with the electric grade cold extrusion. And the tin treatment, the contact effect is very good, the outer sheath tube used is a special high-quality rubber hose customized from the rubber factory, the rubber tube and the electrode sealing tightness are clamped with copper clamps, and the water-cooled cable has a small bending radius. long lasting.

10. Flare lock nut water-cooled cable

The connection with the device is a tapered surface, the nut is locked, the maximum contact surface is ensured, the current transmission is reliable, and the cooling water sealing effect is good. For high frequency equipment.

11. High frequency water cooled cable

Non-contact electrode, soft wire enameled wire, used for high frequency surface quenching, high frequency diathermy, high frequency melting, no surface skin effect, energy saving, durable.