Detailed configuration list of KGPS-0.75T-3 induction melting furnace
　　 KGPS-0.75T-3 induction melting furnace, compared with other types of 0.75T electric furnaces, can save 80-100 degrees per ton of steel melting (power consumption can be as low as 520 degrees per ton of molten steel).
1. Electric cabinet:
1. Rated phase advance voltage: 700V, intermediate frequency output voltage 1300V, DC current: (maximum) 1200A, 　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　KW
2. KK Thyristor 1000A/2000V 8 pcs
3. KP SCR 1000A/2500V 6 pcs
4. Air switch 1600A
5. Installed copper bar 80mm X 6mm
6, Reactor (copper pipe diameter 15mm, wall thickness 1.5mm coil, 12), a balance reactor
6. Intelligent system
2. Capacitor cabinet:
Capacitor 2000KF/1200V 4 sets, 360KF/1200V 1 set
Three, stove
Reducer: 431
Furnace shell: diameter 1130 mm high 1390 mm.
Induction coil: Copper tube 25mm X 30mm X 3mm inner diameter 630mm 25 circles.

Features:
1. Intelligent system, fast protection speed, durable thyristor, good starting performance, stable work and convenient operation.
2. Adopt large copper row installed machine, increase reactor (for 1T electric furnace), and save electricity.
3. Using a 2-ton electric furnace structure, the bottom heat is small, the bottom is durable, not easy to wear, and the bottom loss is small; using a boost circuit, the voltage at both ends of the electric furnace can reach 2600V (2 times the output voltage of the electric cabinet), Water cables and induction coils have low loss; 700V phase-in voltage, reactors, installed copper bars, and phase-in cables have low loss.