Characteristics and storage of soft mica board

The soft mica board is made of silicone resin, 15-25% resin and about 5% of volatile matter, mixed with heat-resistant paint, and after proper heat drying, it is formed with moisture resistance, heat resistance and softness. The following soft mica board manufacturers Let me give you a detailed introduction to the high temperature resistant soft mica board.

1. Softness. The biggest feature of soft mica board is softness. It has good enough soft properties at room temperature, and can still maintain this performance after 60 days of manufacture.

2. High temperature resistance. Its high temperature resistance is also very good. It can work for a long time at a temperature of 500 ℃, and it will not be damaged if it reaches a higher temperature in a short time. For electronic products, this temperature fully meets the requirements. When the temperature increases, the performance of the soft mica board will not decrease.

3. Good mechanical processing performance. It can be processed into the required style according to the needs. Some soft products are not easy to handle, and the size is prone to error when cutting, but it does not, whether it is cutting, cutting or other processing is very convenient.

4. Corrosion resistance. It has stable chemical properties, is not corroded by acid, alkali, salt or solution, and has good moisture resistance. It can be used in humid environments without fear of contact with chemical products.

Instructions for storage, handling and use of soft mica board

1. During handling and transportation, prevent mechanical damage, moisture and direct sunlight.

2. The manufacturer will not be responsible for quality problems caused by violation of the above regulations.

3. Storage temperature: It should be stored in a dry and clean warehouse with a temperature not exceeding 35°C, and should not be near fire, heating and direct sunlight. If you are in an environment where the temperature is lower than 10°C, it should be placed in a room with a temperature of 11-35°C for at least 24 hours before use.

4. Before cutting and punching the mica board, the work surface, mold and machine must be cleaned to prevent impurities such as iron filings and oil from polluting the mica board.

5. Storage humidity: Please keep the relative humidity of the storage environment below 70% to prevent the soft mica board from getting wet.

6. Shelf life: 6 months from the date of delivery.

https://songdaokeji.cn/