Questions that need to be paid attention to in induction heating furnace quenching heat treatment

The induction heating furnace can be customized according to your requirements. The induction heating equipment itself is a non-standard product. We need customers to provide some parameters of the workpiece for the design and production, such as: the length and width of the workpiece and the output required by the equipment per hour, etc. Related parameters.

The induction heating furnace has a unique design concept, a humanized design, and an intimate focus on customer experience. Designed with high quality standards, the excellent quality and stable performance of the intermediate frequency induction heating equipment are beyond the reach of competing models.

What are the issues that need to be paid attention to in induction heating furnace quenching heat treatment?

1. Determine the technical requirements for quenching of the workpiece

The surface hardness requirements of the parts after heat treatment in the induction heating furnace are related to the chemical composition of the material and the conditions of use. The depth of the quenching layer is mainly determined according to the mechanical properties of the workpiece. There are different requirements for the part and size of the hardened zone. According to the material and working conditions of the part, the grade range of each grid is specified.

Second, the selection of quenching temperature of induction heating equipment

The induction heating furnace has a fast heating speed. Compared with the general heating method, a higher heating speed is selected. The suitable heating temperature is related to the chemical composition of the steel, the original structure state and the heating speed and other factors;

Questions that need to be paid attention to in induction heating furnace quenching heat treatment

Third, the choice of frequency of induction heating equipment

The selection of the frequency of the quenching heat treatment equipment is mainly determined according to the depth of the quenching layer and the size of the workpiece. When the equipment is given or selected, the frequency of the equipment is an unadjustable parameter;

4. Induction heating method and process operation

1. Simultaneous heating method. In this heating method, the heated surface is heated at the same time. The entire part of the workpiece that needs to be heated is surrounded by the inductor. In mass production, in order to give full play to the equipment potential and improve production efficiency, as long as If the output power of the induction hardening equipment is sufficient, simultaneous heating should be used as much as possible.

2. Continuous heating method, the heating and cooling of the surface of the parts are carried out continuously. Continuous heating productivity is low, but the heating area is reduced, and the power of the equipment can be reduced, thus expanding the application range of the equipment.