Steel induction furnace

Steel induction furnace - is engaged in casting, induction furnace steel making, molten steel special steel induction furnace induction furnace is divided into: a small-type molten steel furnaces, steel melting furnace of medium, large steel melting furnace.

Fast steel induction furnace technical parameters

Small-type molten steel furnaces are those?

1 , 0.25T steel melting induction furnace

2 , 0.5T steel melting induction furnace

3 , 1T steel melting induction furnace

4 , 2T steel melting induction furnace

5 , 3T steel melting induction furnace

6 , 5T steel melting induction furnace

Medium-sized steel melting furnace are those?

1 , 10T steel induction furnace

2 , 15T steel induction furnace

3 , 20T steel induction furnace

4 , 30T steel induction furnace

Large steel melting furnace are those?

1 , 50T medium frequency steel induction furnace

2 , 60T intermediate frequency furnace

What are the advantages of using steel furnace steelmaking and induction furnace steelmaking ?

1. The electricity consumption of steel smelting tons under normal working conditions is 550-600KW.h ;

2 , the power factor is maintained above 0.96 , no additional compensation device is required;

3. Effectively control high harmonics, do not interfere with surrounding electrical equipment, and do not pollute the power grid;

4 , the frequency adapts to a wide range, and always maintains the best resonance state during the melting process;

5 , zero voltage scanning soft start mode, can be started or stopped at any time in any state, no impact on the power supply;

6 , rapid smelting, low production costs; low pollution, in line with national environmental requirements;

7. It can be directly melted from the cold furnace, and the solution can be completely emptied. It is convenient to replace the melt material;

8. Power adjustment is flexible and convenient, and can be continuously and smoothly adjusted; temperature is uniform and easy to control, oxidation loss is small, and metal composition is uniform;

9. The furnace shell adopts steel structure or cast aluminum alloy, and the floor space is small; the furnace body is easy to turn over and tilt, and manual, electric and hydraulic tilting furnace modes are available;

10 , leaking furnace alarm device, timely and effective protection of personal and equipment safety;

11. The furnace lining and ejection mechanism makes it quick and efficient to replace the furnace lining and improve production efficiency;

12 , wide frequency adaptation range, rapid melting, low production cost, uniform temperature and easy to control;

13 、The furnace body is easy to turn over and the metal composition is even;

14 , small footprint, effective management of higher harmonics.

What is the power consumption of induction furnace steelmaking ?

The power consumption of induction furnace steelmaking is related to many factors, such as the size of the molten steel furnace , the quality of the scrap steel, and the skill and laziness of the furnace. Generally speaking, the power consumption is between 550 and 750 degrees, the power consumption of the large tonnage furnace is lower, and the small tonnage is higher.

What are the characteristics of induction furnace steelmaking ?

Induction furnace steelmaking is not called steelmaking. It is to melt steel. The impurities in the steel cannot be removed. This is a disadvantage. The advantage is that some elements in the original steel are not lost, which can reduce the amount of precious elements added and reduce costs.

Steelmaking is the process of getting the pig iron into a steelmaking furnace and melting it according to a certain process. According to the survey online, steel products include steel ingots, continuous casting billets and direct casting into various steel castings. Generally speaking, steel generally refers to steel that is rolled into various steel materials. Steel is a ferrous metal but steel is not exactly equal to ferrous.

What information does the customer need to provide to the supplier before purchasing the steel induction furnace ?

1. The steel induction furnace should have room for layout and the area of the plant needs to be provided.               And layout

2. The customer needs to provide the capacity of the transformer, the magnitude of the incoming line voltage, and the frequency of the incoming line voltage.

3. The steel induction furnace needs water cooling equipment, and the configuration of the steel induction furnace contains water cooling equipment.

4, the furnace has an induction furnace steel furnace steel and aluminum furnace, the client needs to specify the furnace structure

5 , the power supply of the steel induction furnace is the intermediate frequency power supply, the line structure of the intermediate frequency power supply is divided into the inverter parallel and the inverter series structure, the inverter series structure is energy-saving, the power factor is 0.98 , and the line is stable. The inverter parallel structure is of the common type with a power factor of 0.92 , which requires the customer to specify the line structure.