Contact
Tel: 18037961302
Sales hot line ( 24 hours  service): 18037961302

E-Mail: firstfurnace@gmail.com

whatsapp:+8618037961302

Adress: Luoxin Industrial Park, Luoyang, Henan
  • Products
  •  5T Induction Meltin

     500kg induction mel

    induction melting furnace

    3T medium frequency induction

    2T frequency induction me

    1T Medium Frequency Induction

    Bar heating furnace

    300KG electromagnetic melting

    250 KG electromagnet

    200 KG electromagnet

    silver melting furnace

    Brass melting Furnace

    atomization milling equipment

    Platinum melting furnace

    Selection of common spare part

    Medium frequency copper meltin

    scrap copper melting furnace

    800kg electromagnetic

    600KG electromagnetic copper m

    500KG electromagnetic

    400KG electromagnetic copper m

    350KG electromagnetic copper m

    300KG electromagnetic copper m

    250KG electromagnetic copper m

    250 kg electromagnetic

    200KG electromagnetic copper m

    200KG medium frequency copper

    100KG electromagnetic copper m

    Medium frequency copper melting furnace

    product description

        

    Medium frequency copper melting furnace , equipment for melting a small amount of copper, copper furnace manufacturer, the lowest cost of molten copper, fast melting copper furnace, 
    Uses: The most suitable melting copper powder, copper wire, copper scrap, copper block, copper, and electrolytic copper furnace equipment, copper is melted, the molten copper, the molten copper strip, the molten brass, the molten copper, the molten copper foil device,

    First, the medium frequency copper melting furnace equipment selection table

    Equipment model

     Gold, silver

    Copper, tin, lead, zinc

    Aluminum, silicon, magnesium

    Input voltage

    Melting time min

    SD - 7kw

    2KG

    2KG

    500kg

    220v

    10min

    SD -15 kw

    10KG

    10KG

    3kg

    380v

    10min

    SD -25 kw

    20KG

    20KG

    6kg

    380v

    20min

    SD Z-35 kw

    40KG

    40KG

    10kg

    380v

    30min

    SD Z- 45kw

    60KG

    60KG

    20kg

    380v

    30min

    SD Z- 70kw

    100KG

    100KG

    30kg

    380v

    300min

    SD Z- 90kw

    120KG

    120KG

    40kg

    380v

    30min

    SD Z-110kw

    150KG

    150KG

    60kg

    380v

    40min

    SD Z-160kw

    200KG

    200KG

    70kg

    380v

    40min

    Second, the medium frequency copper melting furnace configuration:

    Medium frequency copper melting furnace configuration list

    Serial number

    name

    unit

    Quantity

    Remarks

    1

    Intermediate frequency power supply

    station

    1

    Standard

    2

    Capacitor compensation box

    station

    1

         Standard

    3

    Electric overturning furnace

    station

    1

    Standard

    4

    Split connection cable

    One

    1

    Standard

    5

    Output water cooled cable

    set

    1

    Standard

    6

    control box

    One

    1

    Standard

    Third, the customer self- installed machine accessories ( circulation cooling system ) :

    1. Three-phase air switch 400A 1 ;

    2. Power connection soft cable 90 mm2 several meters;

    3 . Cooling tower 30 tons 1;

    4. Pump 3.0kw/ head 30-50 meters 1 set ;

    5 , equipment inlet and outlet water pipes: high pressure enhanced water pipe outer diameter 16 mm, inner diameter 12 mm several meters

    6. Water pump inlet and outlet water pipe: 1 inch (inner diameter 25 mm) with wire high pressure reinforced pipe several meters

    Fourth, the intermediate melting Tonglu using Procedure:

    1, electrical connection: access to a dedicated power supply line, respectively, three-phase air switch. Then connect the ground wire. ( Note that the three-phase electric power should be able to meet the use of the equipment, and the wire thickness should be used according to the instructions )

    2 , water: (depending on continuous working time and workload) select the cooling water system to achieve water circulation cooling.

    3 , water: open the waterway, and check the water outlet of each device to see if there is water outflow, whether the flow and pressure are normal .

    4, power: the power switch to open the control, followed by a switch to open the air behind the machine, and then turn the power switch on the control panel.  

    5 , start: Before the first furnace starts, the heating power potentiometer should be adjusted to the minimum as much as possible, and then slowly adjusted to the required power after starting. Press the start button to start the machine. At this time, the heating indicator on the panel lights up, and the prompt sound of normal operation and the work light flash simultaneously. 
    6. Observation and temperature measurement: In the heating process, it is mainly determined by visual inspection when to stop heating.

    7. Shutdown: Shutdown, the control device switches off first, then turn off the main power external switch, then delayed until about 1 hour after the furnace temperature down; then off equipment cooling water, the heat inside the machine to facilitate the induction loop and the heat distributing . 
    8. In areas where it is easy to freeze in winter , it should be noted that after each use, compressed air should be used to blow out the water in and out of the equipment to prevent internal cracking of internal fittings and water pipes.

    6. Can the molten copper use an intermediate frequency induction furnace?

    The copper melting furnace can choose medium-frequency copper melting furnace, and the small energy-saving molten copper has a good quality melting of 150KG~~500KG capacity.

    If you choose to use a steel shell energy-saving copper melting furnace, the energy saving rate will increase by about 10% . The price is very high and the advantages are obvious.

    Fused copper, molten zinc, and molten aluminum are suitable for medium frequency induction furnaces, intermediate frequency furnaces for melting copper and copper alloys .

     

    https://www.zplkz.com/plus/view.php?aid=806


    Copyright© 2007-2013 songdao Electric furnace manufacturing Co,.Ltd All Rights Reserved
    Tel:18037961302 Sales hot line ( 24 hours service): 18037961302
    E-Mail:firstfurnace@gmail.com
    Adress: Luoxin Industrial Park, Luoyang, Henan