Tel: 18037961302
Sales hot line ( 24 hours  service): 18037961302



Adress: Luoxin Industrial Park, Luoyang, Henan
  • Products
  • 2T intermediate frequency

    1T intermediate frequency

    1T series intermediate frequen

    0.25T series intermediate freq

    0.25T parallel intermedia

    0.5T intermediate frequency fu

    0.5T parallel intermediate fre

    Steel Melting Furnace

    3T Induction Furnace

    iron melting induction furnace

    Electric furnace building mach

    Z145W microseismic compaction

    300 kg induction melting furn

    400*400 Square manhole cover B

    Square manhole cover

    700mm*800mm Manhole cover B12

    700 KW Induction Heating Furna

    300 KW Induction Heating Furna

    250 KW Induction Heating Furna

    500kg Induction Melting Furnac

    500kg Metal Induction Melting

    1 Ton Aluminum shell Induction

    1 Ton Induction Melting Furnac

    2 Ton Aluminum Shell Induction

    2T Induction Melting Furnace Q

    3Ton Aluminum Shell Induction

    3 Ton Induction Melting Furnac

    5 Tons Hydraulic Steel Shell I

    Industrial electric furnace technical information

    Introduction of small medium frequency copper melting furnace
    The small medium frequency copper melting furnace includes - intermediate frequency power cabinet, compensation capacitor, dumping furnace body and water cooling cable. The furnace body is composed of four parts: furnace shell, induction coil, furnace lining, tilting furnace and reduction gear box. The furnace shell is made of non-magnetic material, and the induction coil is a spiral cylinder made of rectangular hollow copper tube. Cool water. The coil leads out the copper row and communicates with the water-cooled cable. The furnace lining is close to the induction coil and is sintered by quartz sand. The tilting of the furnace body is directly rotated by the tilting gear box. The tilting gearbox is a two-stage turbine shifting gear with good self-locking performance, stable and reliable rotation, and the furnace is closed when emergency power is cut off to avoid danger. The control of the furnace reduction box motor of the two furnaces can be selected by the furnace selection switch. The switch box with the four-core rubber line enables the operator to stand tilting at the appropriate position and reset to perform jog control.

    Small melting copper furnace and nine features:

    1, installation and operation is very convenient, that is, learning will be;

    2, ultra-small size, light weight, movable, occupying less than 1 square meter;

    3, 24 hours uninterrupted smelting capacity;

    4, energy saving;

    5. It is convenient to replace the furnace body with different weight, different materials and different furnace modes to meet various melting requirements;

    6, using ultra-small medium frequency induction heating power supply, is very different from traditional intermediate frequency power supply

    7, heating and heat transfer is good, the temperature is even

    8. The medium frequency magnetic field has magnetic stirring effect on the molten metal, which is beneficial to uniform composition and scumming.

    9. According to the recommended equipment and the maximum melting amount, the melting time of each furnace is 20-30 minutes.

    Copyright© 2007-2013 songdao Electric furnace manufacturing Co,.Ltd All Rights Reserved
    Tel:18037961302 Sales hot line ( 24 hours service): 18037961302
    Adress: Luoxin Industrial Park, Luoyang, Henan