Contact
Tel: 18037961302
Sales hot line ( 24 hours  service): 18037961302

E-Mail: firstfurnace@gmail.com

whatsapp:+8618037961302

Adress: Luoxin Industrial Park, Luoyang, Henan
  • Products
  • Gear hardening machine

    Large diameter steel pipe quen

    Piston rod quenching and tempe

    Hand-held induction heater

    Grinding rod quenching and tem

    Induction forging machine

    induction heating machine 

    Induction heater

    High frequency induction heate

    Super audio induction heating

    Super audio induction heating

    Guideway quenching integrated

    Quenching equipment for machin

    Round steel end heating furnac

    Steel pipe heat treatment prod

    Square steel quenching and tem

    Sucker rod quenching and tempe

    Thickened petroleum steel pipe

    Round steel quenching and temp

    Steel pipe quenching and tempe

    Steel plate quenching and temp

    Induction Hardening Machine&nb

    Flywheel ring gear high freque

    Oil drill pipe quenching and t

    Iron induction furnace

    Aluminum melting furnace

    Copper melting furnace

    Small steel melting furnace

    Electric furnace technical information£¨¼¼Êõ£©
        

    What is the frequency of the IF current?

    The industrial intermediate frequency generally refers to 400 Hz, the radio intermediate frequency refers to 465 kHz, and the FM band is about 10 MHz.

    The intermediate frequency has two meanings:

    First, when the frequency is divided. Medium frequency ( MF , Medium Frequency ) refers to the frequency range from 300KHz to 3000KHz , and most of them are AM stations. In the daytime, the propagation distance is short, and at night, since the ionospheric reflection signal can be utilized, it can be transmitted over long distances. However, it is more susceptible to interference from other waves.

    The pitch of most natural instruments is in the mid-range. The place where vocal energy is most concentrated is 500-1000 Hz. The overtones of many natural instruments also fall mainly in the mid-range, such as guitar, and the overtones mainly fall in 2000-5000 Hz. The same is true of violas and cellos.

    Second, according to its position and role in the circuit to divide: IF intermediate frequency (Intermediate Frequency) refers to a high-frequency signal obtained by frequency conversion. In order to be able to stabilize the amplifier operation and reduce interference. Usually receiver high-frequency signal to be changed to an intermediate frequency signal.

    The image IF signal of the TV set is 38MHZ.

    The intermediate frequency signal of the audio is 6.5MHZ.

    The medium frequency signal of the medium and short wave radio is 465KHz.

    The intermediate frequency of the FM radio is 10.7MHZ

    Radio frequency refers to the transmission frequency, because some signals may not be suitable for direct transmission (the frequency is illegal, or the signal itself is not allowed). Therefore, to modulate the signal, the modulator itself needs a suitable oscillating signal, and the original signal is added to it. This oscillating signal is called a carrier, and the modulated carrier is included.


    Copyright© 2007-2013 songdao Electric furnace manufacturing Co,.Ltd All Rights Reserved
    Tel:18037961302 Sales hot line ( 24 hours service): 18037961302
    E-Mail:firstfurnace@gmail.com
    Adress: Luoxin Industrial Park, Luoyang, Henan