Contact
Tel: 18037961302
Sales hot line ( 24 hours service): 18037961302
Sales hot line ( 24 hours service): 18037961302
E-Mail: firstfurnace@gmail.com
whatsapp:+8618037961302
Adress: Luoxin Industrial Park, Luoyang, HenanLarge diameter steel pipe quen
Piston rod quenching and tempe
Grinding rod quenching and tem
High frequency induction heate
Quenching equipment for machin
Round steel end heating furnac
Steel pipe heat treatment prod
Square steel quenching and tem
Sucker rod quenching and tempe
Thickened petroleum steel pipe
Round steel quenching and temp
Steel pipe quenching and tempe
Steel plate quenching and temp
Induction Hardening Machine&nb
Flywheel ring gear high freque
Electric furnace principle（原理）
How to choose the appropriate inverter thyristor for IF power supply
In the process of designing the intermediate frequency power supply, how to select the appropriate inverter thyristor according to the actual application can follow the following principles:
1. According to the working frequency range of the intermediate frequency power supply:
a) KK-type thyristors with a frequency of 100HZ---500HZ with a selected turn-off time of 20μs-45μs.
b) KK-type thyristors with a frequency of 500HZ---1000HZ with a selected turn-off time of 18μs-25μs.
c) KK-type thyristors with a frequency of between 1000 Hz and -2500 Hz with a selected turn-off time of 12 μs to 18 μs.
d) The selected off-time of the frequency at 2500HZ---4000HZ is controllable at KKG type of 10μs-14μs.
e) KA type thyristor with a frequency of 4000HZ---8000HZ with a selected off-time of 6μs - 9μs.
2. According to the output power of the intermediate frequency power supply:
According to the theoretical calculation of the parallel bridge inverter circuit, the current flowing through each thyristor is 0.455 times of the total current. Considering that there is sufficient margin, the thyristor of the same size as the rated current is usually selected.
a) The thyristor with a power of 50 kW----100 kW with a selected current of 300 A/1400 V. (380V phase-in phase voltage)
b) The thyristor with a selected current of 500A/1400V with a power of 100KW--250KW. (380V phase-in phase voltage)
c) The thyristor with a selected current of 800A/1600V with a power of 350KW-400KW. (380V phase-in phase voltage)
d) The thyristor with a selected current of 1500A/1600V with a power of 500KW--750KW. (380V phase-in phase voltage)
e) A thyristor with a selected current of 1500A/2500V with a power of 800 KW to 1000 KW. (660V phase-in voltage)
f) The thyristor with a selected current of 2000A/2500V with a power of 1200KW-1600KW. (660V phase-in voltage)
g) A thyristor with a current of 2500A/3000V with a power of 1800KW-2500KW. (1250V phase voltage)
In the process of designing the intermediate frequency power supply, how to select the appropriate inverter thyristor according to the actual application can follow the following principles:
1. According to the working frequency range of the intermediate frequency power supply:
a) KK-type thyristors with a frequency of 100HZ---500HZ with a selected turn-off time of 20μs-45μs.
b) KK-type thyristors with a frequency of 500HZ---1000HZ with a selected turn-off time of 18μs-25μs.
c) KK-type thyristors with a frequency of between 1000 Hz and -2500 Hz with a selected turn-off time of 12 μs to 18 μs.
d) The selected off-time of the frequency at 2500HZ---4000HZ is controllable at KKG type of 10μs-14μs.
e) KA type thyristor with a frequency of 4000HZ---8000HZ with a selected off-time of 6μs - 9μs.
2. According to the output power of the intermediate frequency power supply:
According to the theoretical calculation of the parallel bridge inverter circuit, the current flowing through each thyristor is 0.455 times of the total current. Considering that there is sufficient margin, the thyristor of the same size as the rated current is usually selected.
a) The thyristor with a power of 50 kW----100 kW with a selected current of 300 A/1400 V. (380V phase-in phase voltage)
b) The thyristor with a selected current of 500A/1400V with a power of 100KW--250KW. (380V phase-in phase voltage)
c) The thyristor with a selected current of 800A/1600V with a power of 350KW-400KW. (380V phase-in phase voltage)
d) The thyristor with a selected current of 1500A/1600V with a power of 500KW--750KW. (380V phase-in phase voltage)
e) A thyristor with a selected current of 1500A/2500V with a power of 800 KW to 1000 KW. (660V phase-in voltage)
f) The thyristor with a selected current of 2000A/2500V with a power of 1200KW-1600KW. (660V phase-in voltage)
g) A thyristor with a current of 2500A/3000V with a power of 1800KW-2500KW. (1250V phase voltage)
Iron induction furnace
Aluminum melting furnace
Copper melting furnace
Small steel melting furnace
Small induction melting furnace
Induction iron furnace
3T intermediate frequency iron melting f
0.25T Intermediate Frequency Furnace
0.5T Intermediate Frequency Furnace
Medium Frequency Furnace
2T Induction Melting Furnace
1T Induction Melting Furnace
500kg Induction Melting Furnace
250kg Induction Melting Furnace
Induction Melting Furnace
3 T Induction Melting Furnace
5T Induction Melting Furnace
1T One Belt Two Intermediate Frequency F
5T One Belt Two Intermediate Frequency F
3T One Belt Two Intermediate Frequency F
2T One Belt Two Intermediate Frequency F
5T Parallel Intermediate Frequency Furna
5T Intermediate Frequency Furnace
5T Series Intermediate Frequency Furnace
3T Series Intermediate Frequency Furnace
2T Series Intermediate Frequency Furnace
1T Series Intermediate Frequency Furnace
0.5T Series Intermediate Frequency Furna
0.25T Series Intermediate Frequency Furn
1T Parallel Intermediate Frequency Furna
2T Parallel Intermediate Frequency Furna
0.5T Parallel Intermediate Frequency Fur
Product Class