EMail: firstfurnace@gmail.com
whatsapp:+8618037961302
Adress: Luoxin Industrial Park, Luoyang, Henan0.25T Intermediate Frequency F
0.5T Intermediate Frequency Fu
500kg Induction Melting Furnac
250kg Induction Melting Furnac
1T One Belt Two Intermediate F
5T One Belt Two Intermediate F
3T One Belt Two Intermediate F
2T One Belt Two Intermediate F
5T Parallel Intermediate Frequ
5T Intermediate Frequency Furn
5T Series Intermediate Frequen
3T Series Intermediate Frequen
2T Series Intermediate Frequen
1T Series Intermediate Frequen
0.5T Series Intermediate Frequ
0.25T Series Intermediate Freq
1T Parallel Intermediate Frequ
2T Parallel Intermediate Frequ
0.5T Parallel Intermediate Fre
0.25T Parallel Intermediate Fr
2T induction melting furnace technical configuration selection table
1, 2T induction melting furnace power supply parameter selection table
Serial number 

Project 
unit 
parameter 
Remarks 
1 

Transformer capacity 
KVA 
1500 
10KV/2*660V /6 phase / 50H＠ / Ddoyn11 (ONAN) 
2 

Transformer primary voltage 
KV 
10 

3 

Transformer secondary voltage 
V 
660 

4 

rated power 
KW 
1250 
power supply 
5 

Rated frequency 
KHz 
0.5 

6 

DC voltage 
V 
830 

7 

IF voltage 
V 
1200 

8 

Induction loop port voltage 
V 
2400 

11 

Rectifier 

12 pulses 

12 

Inverter 


8 thyristors 
13 

Power conversion efficiency 

> 0.95 

14 

Power factor 

> 0.92 
Under rated power 
15 

Constant power output time 

> 92% 
Within the melting cycle 
16 

Start success rate 

100% 

17 

Working noise 
dB 
＋85 
1 meter away 
2, 2T induction melting furnace
Serial number 
Project 
Unit 
Parameter 
1 
Rated Capacity 
t 
2.0 
2 
Rated operating temperature 
＜ C 
1600 
3, 2T induction melting furnace melting rate and melting of the power consumption,
Serial number 
Project 
Unit 
Parameter 
1 
Melting rate (1600 ＜C) 
t/h 
2.0 
2 
Melting power consumption (1600 ＜C) 
Kwh/t 
＋610 
. 4, 2T induction melting furnace of the hydraulic system
Serial number 
Project 
Unit 
Parameter 
1 
Hydraulic station capacity 
L 
500 
2 
Work pressure 
Mpa 
10 
3 
input power 
KW 
5.5 
4 
Work flow 
L/ min 
>45 
5 
The hydraulic oil supplier provides the model number, and the buyer is responsible for purchasing and expenses. 
5, facilities 2T induction melting furnace, special transformer technical requirements
Serial number 
project 
parameter 
1 
Rated Capacity 
1500KVA 
2 
Primary voltage 
10KV＼5% 3 phase 50HZ 
3 
Secondary voltage 
660V*2 
4 
Primary current 
86.6A 
5 
Secondary current 
656A*2 / (660V) 
6 
Connection group 
Ddoyn11 
7 
Impedance voltage 
UK=6% 
8 
cooling method 
ONAN 
9 
Pressure regulation method 
3speed nonexcitation manual voltage regulation 
10 
Between the mesh side and the valve side 
Add shielding to reduce the impact of harmonics on the mesh side 
11 
Safeguard 
Heavy and light gas alarm, overpressure release and high oil temperature alarm 
12 
other 
Low loss, high reliability, low noise, etc. 
13 
Winding 
Copper core 
14 
Steel sheet 
WISCO produces a new orientation of steel sheet, model 30Q130. 