Contact
Tel: 18037961302
Sales hot line ( 24 hours  service): 18037961302

E-Mail: firstfurnace@gmail.com

whatsapp:+8618037961302

Adress: Luoxin Industrial Park, Luoyang, Henan
  • Products
  • 0.25T Intermediate Frequency F

    0.5T Intermediate Frequency Fu

    Medium Frequency Furnace

    2T Induction Melting Furnace

    1T Induction Melting Furnace

    500kg Induction Melting Furnac

    250kg Induction Melting Furnac

    Induction Melting Furnace

    3 T Induction Melting Furnace

    5T Induction Melting Furnace

    1T One Belt Two Intermediate F

    5T One Belt Two Intermediate F

    3T One Belt Two Intermediate F

    2T One Belt Two Intermediate F

    5T Parallel Intermediate Frequ

    5T Intermediate Frequency Furn

    5T Series Intermediate Frequen

    3T Series Intermediate Frequen

    2T Series Intermediate Frequen

    1T Series Intermediate Frequen

    0.5T Series Intermediate Frequ

    0.25T Series Intermediate Freq

    1T Parallel Intermediate Frequ

    2T Parallel Intermediate Frequ

    0.5T Parallel Intermediate Fre

    0.25T Parallel Intermediate Fr

    Parallel Intermediate Frequenc

    3T Intermediate Frequency Furn

    Industrial electric furnace technical information
        

    In the maintenance of the intermediate frequency melting furnace, the fault of the DC smoothing reactor is a fault that is difficult to judge and handle. The faults that occur in DC smoothing reactors are:

         (1) The user randomly adjusts the air gap of the reactor and the number of turns of the coil, changes the inductance of the reactor, affects the filtering function of the reactor, and causes the DC current of the output to be intermittent, resulting in unstable operation of the inverter bridge. The inverter failed to burn the inverter thyristor. Arbitrarily adjust the air gap of the reactor and the number of turns of the coil. When the inverter bridge is short-circuited, it will reduce the ability of the reactor to block the current rise and burn the thyristor. Changing the inductance of the reactor at will also affect the starting performance of the intermediate frequency melting furnace;

          

        (2) The reactor coil is loose. If the coil of the reactor is loose, the electromagnetic force causes the coil to shake during the operation of the intermediate frequency melting furnace, and the inductance is abrupt, which may cause the inverter to fail during light load starting and low current operation;

          

        (3) The coil of the coil is not well insulated. Short circuit to ground or short circuit between turns, sparking discharge causes the inductance of the reactor to jump and strong electromagnetic interference, making the intermediate frequency melting furnace work unstable. The abnormal sound is generated frequently, and the thyristor is burned by the overcurrent, which causes the insulation of the coil insulation layer to be poor. The short circuit causes are:

     

        a. The cooling is not good, and the temperature is too high, resulting in poor insulation of the insulation layer;

     

        b. The reactor coil is loose, between the coil insulation layer and the coil insulation layer, between the coil insulation layer and the iron core, and the relative movement friction causes the insulation layer to be damaged;

     

        c. When processing the scale of the reactor coil, the acid solution is infiltrated into the coil, and the acid solution corrodes the copper tube and forms a copper salt to destroy the insulating layer.


    Copyright© 2007-2013 songdao Electric furnace manufacturing Co,.Ltd All Rights Reserved
    Tel:18037961302 Sales hot line ( 24 hours service): 18037961302
    E-Mail:firstfurnace@gmail.com
    Adress: Luoxin Industrial Park, Luoyang, Henan