E-Mail: firstfurnace@gmail.com
whatsapp:+86 13015583380
Adress: Luoxin Industrial Park, Luoyang, HenanLarge diameter steel pipe quen
Piston rod quenching and tempe
Grinding rod quenching and tem
induction heating machine 
High frequency induction heate
Quenching equipment for machin
Round steel end heating furnac
Steel pipe heat treatment prod
Square steel quenching and tem
Sucker rod quenching and tempe
Thickened petroleum steel pipe
Round steel quenching and temp
Steel pipe quenching and tempe
Steel plate quenching and temp
Induction Hardening Machine&nb
Flywheel ring gear high freque
2T induction melting furnace technical configuration selection table
1. 2T induction melting furnace power supply parameter selection table
Serial number |
project |
unit |
parameter |
Remark |
1 |
Transformer capacity |
KVA |
1500 |
10KV/2*660V / 6phase /50H△/ Ddoyn-11(ONAN) |
2 |
Transformer primary voltage |
KV |
10 |
|
3 |
Transformer secondary voltage |
V |
660 |
|
4 |
rated power |
KW |
1250 |
power supply |
5 |
Rated frequency |
KHz |
0.5 |
|
6 |
DC voltage |
V |
830 |
|
7 |
IF voltage |
V |
1200 |
|
8 |
Induction coil port voltage |
V |
2400 |
|
11 |
Rectifier |
|
12 pulses |
|
12 |
Inverter |
|
|
8 thyristors |
13 |
Power conversion efficiency |
|
> 0.95 |
|
14 |
Power factor |
|
> 0.92 |
Under rated power |
15 |
Constant power output time |
|
> 92% |
During the melting cycle |
16 |
Startup success rate |
|
100% |
|
17 |
Working noise |
dB |
≤85 |
1 meter away |
2. 2T induction melting furnace
Serial number |
project |
Unit |
Parameter |
1 |
Rated Capacity |
t |
2.0 |
2 |
Rated working temperature |
° C |
1600 |
3. The melting rate and melting power consumption of 2T induction melting furnace ,
Serial number |
project |
Unit |
Parameter |
1 |
Melting rate (1600 ° C) |
t/h |
2.0 |
2 |
Melting power consumption (1600 ° C) |
kwh/t |
≤610 |
. 4, 2T induction melting furnace of the hydraulic system
Serial number |
project |
Unit |
Parameter |
1 |
Hydraulic station capacity |
L |
500 |
2 |
Work pressure |
Mpa |
10 |
3 |
input power |
KW |
5.5 |
4 |
Work flow |
L/ min |
>45 |
5 |
The hydraulic oil supplier provides the model, and the buyer is responsible for the purchase and cost. |
5. Technical requirements for supporting facilities of 2T induction melting furnace and special transformers
Serial number |
project |
parameter |
1 |
Rated Capacity |
1500KVA |
2 |
Primary voltage |
10KV±5% 3 phase 50HZ |
3 |
Secondary voltage |
660V*2 |
4 |
Primary current |
86.6A |
5 |
Secondary current |
656A*2 /(660V) |
6 |
Connection group |
Ddo-yn11 |
7 |
Impedance voltage |
UK=6% |
8 |
cooling method |
ONAN |
9 |
Pressure regulation method |
3 gears no-excitation manual voltage regulation |
10 |
Between network side and valve side |
Add shielding to reduce the impact of harmonics on the network side |
11 |
Safeguard |
Heavy and light gas alarm, overpressure release and high oil temperature alarm |
12 |
other |
Low loss, high reliability, low noise, etc. |
13 |
Winding |
Copper core |
14 |
Silicon steel sheet |
WISCO produces a new oriented silicon steel sheet, model 30Q130. |